Home / Products / Construction Air Tools / VK FL 22 Kleigrawer - 22 lb
Description
VK FL 22 Kleigrawer - 22 lb
VK FL 22 Kleigrawer - 22 lb word deur Vikay Mining Equipments in Indië vervaardig en is tegnies gelykstaande aan CP FL 22 Trench Digger. Word gebruik vir ligte tot mediumswaar kleigraafwerk. Onderdele vir hierdie masjien word volgens die oorspronklike spesifikasie verskaf. Doen navraag oor prys en lewertyd.
Clay Digger – VK FL22 ( 22 lb )
The VK FL 22 is a 10 kg clay digger, technically equivalent to the Chicago Pneumatic CP FL 22 trench digger. It runs at 1,320 blows per minute on 21 l/s of air through a 19 x 82 mm shank. The machined barrel puts the exhaust port at the top, which keeps dirty air from blocking the tool underground, and the slim body with screw on retainer works in confined trenches. It can be used vertically or horizontally.
Application
Used for light to medium clay digging applications
Demolition trenching
Renovation application
Features
Special features for mining applications ie. machined barrel, exhaust port at top of barrel, less blockage in dirty air environment
Slim design with machined barrel and screw-on retainer to work in tight spaces
This machine can be used both vertically and horizontally
High Power to Weight Ratio
Technical Data
Specifications | Metric | Imperial |
Weight | 10 kg | 22 lb |
Weight with Silencer ( VK FL22S ) | 11 kg | 24 lb |
Length | 495 mm | 19.5" |
Blow per Minute | 1320 | 1320 |
Piston Dia | 40 mm | 1.60" |
Piston Stroke | 44 mm | 1.73" |
Air Inlet | 19 mm | ¾" |
Air Pressure | 6.2 bar | 90 psi |
Air Consumption | 21 l/s | 45 cfm |
Shank Size | 19 x 82 mm | ¾" x 3 ½" |
# Technically equivalent to CP FL 22 Trench Digger
VK FL 22 Clay Digger FAQs
Can the VK FL 22 replace a CP FL 22?
Yes. The VK FL 22 is Vikay's technical equivalent of the Chicago Pneumatic CP FL 22, made in India. A 40 mm piston on a 44 mm stroke gives 1,320 blows a minute at 10 kg on 21 l/s of air at 6.2 bar. It takes the same 19 x 82 mm shank, so clay spades, moil points and chisels already on site will fit.
Will Vikay parts fit my CP FL 22?
Yes. Vikay manufactures the VK FL 22, which is technically equivalent to the Chicago Pneumatic CP FL 22, and the replacement parts alongside it. The same parts serve both, so an existing machine in the field can be maintained on them. Part numbers and the assemblies they belong to are set out on the FL22 Chicago Pneumatic Rock Drill Parts page.
Which Vikay clay digger do I need?
This page is the VK FL 22 at 10 kg, the lightest in the range. Two sizes are manufactured, at 10 kg and 11 kg, each in a plain and a silenced version. Both take clay spades and moil points for trenching, laterite and frozen ground, so the choice comes down to how much weight the operator can work with all shift and whether the site has a noise limit. Check the shank against the spades already held before ordering.
See also: VK FL 22S, VK 222 CHIT, VK 222S CHIT
Will my compressor run the VK FL 22?
The VK FL 22 needs 21 l/s at 6.2 bar (45 cfm at 90 psi), delivered continuously. The inlet is 19 mm, so run at least that hose bore: anything narrower throttles the machine before the compressor does. At 1,320 blows a minute the draw is constant rather than intermittent, so a compressor shared with a second machine has to be sized for both.
Will my existing clay spades, moil points and chisels fit the VK FL 22?
The VK FL 22 takes a 19 x 82 mm shank (¾" x 3 ½"), so any clay spade cut to that shank fits, whatever machine it came off. Check the shank on the tools already held before ordering.
See also: Vikay moil points and chisels