Home / Products / Construction Air Tools / VK TPB 60 Paving Breaker-66lb
VK TPB 60 Paving Breaker-66lb
SKU ID: VKTPB60
Description
VK TPB 60 Paving Breaker-66lb
VK TPB 60 Paving Breaker-66lb is built by Vikay Mining Equipments in India and is technically equivalent to the Toku 60 Paving Breaker. It is used for larger demolition jobs like breaking rock, reinforced concrete, or pavement. Spare parts for this machine are supplied to original specification. Enquire for price and lead time.
VK TPB 60 Paving Breaker-66lb
The VK TPB 60 is a 30 kg pneumatic paving breaker built by Vikay Mining Equipments in India, technically equivalent to the Toku 60 Paving Breaker. It runs at 1,400 blows per minute on 1.7 m3/min of air at 6 bar, through a 28 x 152 mm shank. The TPB series uses a shorter 100 mm stroke at a higher blow rate than the 117 series, which suits continuous breaking of rock, reinforced concrete and pavement. A silenced version is available at 31 kg.
Specifications | Metric | Imperial |
Weight | 30 kg | 66 lb |
Weight With Silencer | 31 kg | 68 lb |
Length | 645 mm | 25.3” |
Blow per Minute | 1400 | 1400 |
Piston Dia | 57.15 mm | 2.25” |
Piston Stroke | 100 mm | 3.93” |
Air Inlet | 19 mm | 3/4 |
Air Pressure | 6 bar | 87 psi |
Air Consumption | 1.7 m3/min | 58 cfm |
Shank Size | 28 x 152 mm | 1 ¹⁄8″ x 6″ |
Shank Size (optional) | 32 x 152 mm | 1 ¼″ x 6 " |
VK TPB 60 Paving Breaker FAQs
Can the VK TPB 60 replace a Toku 60?
Yes. Vikay manufactures the VK TPB 60 in India as the technical equivalent of the Toku 60. A 57.15 mm piston on a 100 mm stroke gives 1,400 blows a minute at 30 kg on 1.7 m3/min of air at 6 bar. It takes the same 28 x 152 mm shank, so moil points, chisels and asphalt cutters already on site will fit.
Which Vikay paving breaker do I need?
This page is the VK TPB 60 at 30 kg, in the middle of the range. Vikay manufactures breakers from 13.5 kg to 42 kg and the weight is the job: 13.5 kg for light construction and plant maintenance, 20 to 30 kg for general breaking, asphalt and pavement, 36 kg and above for reinforced concrete, frozen ground and thick pavement. The lightest machine that will do the work is usually the right one, because a heavier breaker breaks faster but tires the operator sooner. Silenced versions are manufactured alongside most models where noise is regulated.
See also: VK 1230, VK 777, VK 117
Will my compressor run the VK TPB 60?
The VK TPB 60 needs 1.7 m3/min at 6 bar (58 cfm at 87 psi), delivered continuously. The inlet is 19 mm, so run at least that hose bore: anything narrower throttles the machine before the compressor does. At 1,400 blows a minute the draw is constant rather than intermittent, so the compressor has to hold the figure under load, not merely reach it.
Will my existing moil points, chisels and asphalt cutters fit the VK TPB 60?
The VK TPB 60 takes a 28 x 152 mm shank (1 ¹⁄8" x 6"), with 32 x 152 mm available as an option, so any moil point cut to that shank fits, whatever machine it came off. Check the shank on the tools already held before ordering.
See also: Vikay moil points and chisels