Home / Products / Construction Air Tools / VK 1210S Paving Breaker-49lb
Description
VK 1210S Paving Breaker-49lb
VK 1210S Paving Breaker-49lb is built by Vikay Mining Equipments in India and is technically equivalent to the CP 1210S Pneumatic Breaker. It is used for light to medium construction and plant maintenance work. Spare parts for this machine are supplied to original specification. Ask for pricing and delivery.
Paving Breaker – VK 1210S ( 49 lb )
The VK 1210S is the silenced VK 1210, technically equivalent to the Chicago Pneumatic CP 1210S. It holds 1,400 blows per minute and 23 l/s of air, with the muffler adding five pounds. The combination of light weight, high blow rate and reduced noise makes it the usual choice for bridge decks, footpaths and utility work in built up areas.
Features
Improved modern design for excellent durability
Four-bolt back head – withstands rugged use
Reversible piston – reduces maintenance cost
New swivel design for increased manoeuvrability
In addition to the standard units, there are also silence versions (S models)* and versions with extra vibration dampening (SVR models)*.
Technical Data
Specifications | metric | imperial |
Weight Without Silencer | 20 kg | 44 lb |
Weight With Silencer ( VK 1210S ) | 22 kg | 49 lb |
Length | 540mm | 21.2" |
Blow per Minute | 1400 | 1400 |
Piston Dia | 48 mm | 1.90" |
Piston Stroke | 108 mm | 4.25" |
Air Inlet | 19 mm | ¾" |
Air Pressure | 6 bar | 87 psi |
Air Consumption | 23 l/s | 48 cfm |
Shank Size | 25 x 108 mm | 1 |
Shank Size (optional) | 28 x 160 mm | 1⅛" x 6¼" |
Shank Size (optional) | 32 x 160 mm | 1¼" x 6¼" |
# Technically equivalent to CP 1210S Pneumatic Breaker
VK 1210S Paving Breaker FAQs
Can the VK 1210S replace a CP 1210S?
Yes. Vikay manufactures the VK 1210S in India as the technical equivalent of the Chicago Pneumatic CP 1210S. A 48 mm piston on a 108 mm stroke gives 1,400 blows a minute at 22 kg on 23 l/s of air at 6 bar. It takes the same 25 x 108 mm shank, so moil points, chisels and asphalt cutters already on site will fit.
Will Vikay parts fit my CP 1210S?
Yes. Vikay manufactures the VK 1210S, which is technically equivalent to the Chicago Pneumatic CP 1210S, and the replacement parts alongside it. The same parts serve both, so both can be supported out of one parts stock. See the CP 1210S Chicago Pneumatic Paving Breaker Parts page for the part numbers and the assembly each one belongs to.
Which Vikay paving breaker do I need?
This page is the VK 1210S at 22 kg, at the light end of the range. Vikay manufactures breakers from 13.5 kg to 42 kg and the weight is the job: 13.5 kg for light construction and plant maintenance, 20 to 30 kg for general breaking, asphalt and pavement, 36 kg and above for reinforced concrete, frozen ground and thick pavement. The lightest machine that will do the work is usually the right one, because a heavier breaker breaks faster but tires the operator sooner. Silenced versions are manufactured alongside most models where noise is regulated.
Will my compressor run the VK 1210S?
The VK 1210S needs 23 l/s at 6 bar (48 cfm at 87 psi), delivered continuously. The inlet is 19 mm, so run at least that hose bore: anything narrower throttles the machine before the compressor does. At 1,400 blows a minute the draw is constant rather than intermittent, so the compressor has to hold the figure under load, not merely reach it.
Will my existing moil points, chisels and asphalt cutters fit the VK 1210S?
The VK 1210S takes a 25 x 108 mm shank, with 28 x 160 mm available as an option, so any moil point cut to that shank fits, whatever machine it came off. Measure the shank on your existing tools rather than going by the model number.
See also: Vikay moil points and chisels